How can you conduct a risk assessment of fire in a factory.? I have some knowledge of the land back, but could do with some examples.
A fire inspector and even your insurance company may be willing to help.
However, if you're willing to give it a shot yourself, here are some things to watch for ...
1. Exitways are clearly marked and unobstructed.
2. Isleways emerged.
3. Flammable materials are not "stack" in a given region
4. flammable fuels are stored properly and in appropriate containers and cabinets or flammable areas stoage.
5. Large containers of flammable liquids are grounded.
6. industrial processes that could cause a fire are adequately protected by fire detection and suppression equipment.
7. Sprinkler systems have been recently inspected by a qualified service company.
8. Portable fire protection equipment (extinguishers, hand wheels, etc.) have been inspected by a qualified service company.
9. Ensure that safe practices are in electrical use. Extension cords should never be used unless it is a temporary condition!
10. maintenance proceedures include a lock-out "procedure.
11. Fire safety proceedures and response are posted and have been communicated to all employees.
12. Communicate with employees. safety meetings are important. Allow suggestions and concerns are expressed and processed.
That should be enough to start.
Want more? - Try these links ...
Get an agent of the local fire brigade assessment - and if he dislikes what he sees, materials, exit points, signage at the exit, just being out, you close until it is corrected. Annoying yes, but ultimately could save lives and an insurance premium very boring.
First I get the certificate in health and safety.
Try contacting your local fire department. They should have all the answers you need.
A fire department may give you an unofficial poll, but you can also check with building inspector and see if know someone who is professionally. If not try and ask sprinkler systems and fire.
Hopefully "NO" with .. the inspector shall,
I do not know where you are .., therefore, local codes.
I would suggest you contact the "Building Codes and Regulations" department in your area and ask for the rules governing that particular building / business.
Visit your local fire station. Im sure they could help
Posted on May 25, 2010.