Motion Security

I have a new home security motion detector that I intend to install in my driveway. The detector is white / black son, but I only have a regular outlet that I can get electrical power. Is it possible to install using my POS?

Just go buy a plug end to any Walmart ... etc. Home Depot and put it on the son .. By putting an end plug on something that light .. He did not really matter which side you well over the black or white plug end .. very easy to do .. Do not get one of them Little Cheap plug ends at 2.00 .. obtain a higher duty for good around 5.00 ..

Yes, you have the white conected to the common Silfer

I assume your OULET is outside. You can get an extension box and the pipe to where you want the light. Wire as it normally would (white on white, black on black) oultel Put in the extension box. Hope this helps.

To answer this better than you would have to give more detailed information.

The black wire is the power wire, white is neutral, and often there is a green ground wire. You might also consider adjusting the sensitivity of the detector to avoid the lights being activated by stray cats and such.